Skip to content
CramShare
FreePractice exam

A Guide to Temporary Traffic Control in Work Zones

HEAL100 Health Care — exam and revision material · Other

Updated today

Health Care exam material, 8 pages. Originally published on StudyMerit.

Pages
8
Academic year
2025/2026
Language
English

What’s included

Preview 3 of 8 pages

See the first 3 pages exactly as they appear in the document.

Read page 1 as text

Work Zone Temporary Traffic Control Tech Pre-Quiz Students also studied Science Engineering Civil Engineering Save IMSA Workzone Safety 93 terms smurfsk Preview IMSA work zone safety 81 terms jacobjspivey Preview ATSSA Traffic Control Supervisor Re ... 53 terms jnahoward Preview MOT Ce 13 terms rive Practice questions for this set Learn 1 / 7 Study with Learn All flaggers must use the same three standard signals: The work zone starts at the first advance warning sign; therefore, where should the flagger stand when directing traffic in a TTC (work) zone? on the shoulder adjacent ti traffic being controlled How many orange and black TTC signs should there be in each direction on a 2-way, 2-lane rural roadway? Three Choose an answer 1 Stop Slow Proceed 2 Start 3 Flagger Ahead 4 Speed Limit In MPH Don't know?

Read page 2 as text

Orange and black TTC signs in each direction on a 2-way, 2-lane rural roadway what should the signs spacing be 500ft How many feet apart should the advanced warning signs be on a high speed urban roadway? 350 Advanced warning signs for additional emphasis, signs may be posted on the left hand side of the highway Taper length refers to: the distance required to safely route traffic from one lane to another The taper length is based upon: width of the lane closed and speed of the roadway In a taper, the maximum distance between channelizing devices should be: equal in feet to the speed limit On a barricade, if the stripes start at the upper right side and angle down to the lower left side; traffic should pass to the left At night time and/or on high speed roads greater than 45 mph, cones shall be: retoreflectorized and have at least two white bands/stripes and at least 28" tall On a rural, 2-lane road, where would you place the flagger in respect to the beginning of a taper for a closed lane? at the beginning of the taper The STOP/SLOW paddle is preferred over the flag True Flags may be used in which of the following situations? emergencies If used at night, the flag needs not to be retoreflectorized as long as the flagger station is floodlit. True When flagging at a spot obstruction, a position may have to be taken on the shoulder opposite the barricaded section to operate effectively True During nighttime conditions, arrow boards needs to be reduced in brightness true Which factors should you consider in formulating a TTC plan? type of work to be done traffic volume traffic speed school bus routes The rerouting of traffic onto a temporary bypass road is known as a: diversion Parking signs are classified as: regulatory

Read page 3 as text

Pavement markings no longer needed should be removed by: grinding A TTC zone should be checked: routinely Traffic control devices include: Signs Signals pavement markings The Federal Highway Administration's national standard for traffic control devices is the: Manual of uniform traffic control devices In the manual, an Option condition is on that is: a statement of a permissive condition A TTC plan is a: temporary traffic control plan The MUTCD states that individuals responsible for the implementation of TTC measures should: be trained and/or certified TTC principles and procedures include: traffic safety, movement, and guidance TTC zone inspection TTC zone maintenance The based on the fundamental principles of TTC work zone should be inspected: during both daytime and nighttime The MUTCD indicates that a "standard" is a mandatory practice True The MUTCD indicates that a "guidance" is a recommended practice True The MUTCD indicates that a "option" is a permissive condition True A tort in legal terminology is a ___________ other than a breech of contract for which a court will provide a remedy Civil wrong Liability for a tort means the _______ to pay money damages to the person injured or damaged Legal obligation Negligence can be defined as: The failure to do something that a "reasonable person" would ordinarily do the doing of something that a reasonable ordinarily not do The failure to use ordinary care The obligation for a person to conform to a certain standard of conduct is the definition of: Duty The MUTCD is an example of: accepted standards and practices

That’s the free preview

You’ve read 3 of 8 pages. The whole document is yours with a free account, and it stays in your library.

Others on this course also opened

Free

With a free account