Engineering Electromagnetics, 8th Edition Solution Manual

CHAPTER 2 2.1. Three point charges are positioned in the x-y plane as follows: 5nC at y = 5 cm, -10 nC at y = 5 cm, 15 nC at x = 5 cm. Find the required x-y coordinates of a 20-nC fourth charge that will produce a zero electric field at the origin. With the charges thus configured, the electric field at the origin will be the superposition of the individual charge fields:  1 15 E0 = ax 4⇡✏0 (5)2 5 ay (5)2 10 ay (5)2 1 = 4⇡✏0 ✓ ◆ 3 [ax 5 ay ] nC/m The field, E20 , associated with the 20-nC charge (evaluated at the origin) must exactly cancel this field, so we write: 1 E20 = 4⇡✏0 ✓ ◆ 3 [ax 5 20 ay ] = 4⇡✏0 ⇢2 ✓ 1 p 2 ◆ [ax ay ] q p 100/(3 2) = 4.85. The x and p y coordinates of the 20-nC charge will both be equal in magnitude to 4.85/ 2 = 3.43. The coodinates of the 20-nC charge are then (3.43, 3.43). From this, we identify the distance from the origin: ⇢ = 2.2. Point charges of 1nC and -2nC are located at (0,0,0) and (1,1,1), respectively, in free space. Determine the vector force acting on each charge. First, the electric field intensity associated with the 1nC charge, evalutated at the -2nC charge location is: ✓ ◆ 1 1 p E12 = (ax + ay + az ) nC/m 4⇡✏0 (3) 3 p in which the distance between charges is 3 m. The force on the -2nC charge is then F12 = q2 E12 = 2 1 p (ax + ay + az ) = (ax + ay + az ) 10.4 ⇡✏0 12 3 ⇡✏0 The force on the 1nC charge at the origin is just the opposite of this result, or F21 = +1 (ax + ay + az ) 10.4 ⇡✏0 12 nN nN 2.3. Point charges of 50nC each are located at A(1, 0, 0), B( 1, 0, 0), C(0, 1, 0), and D(0, 1, 0) in free space. Find the total force on the charge at A. The force will be:  (50 ⇥ 10 9 )2 RCA RDA RBA F= + + 3 3 4⇡✏0 |RCA | |RDA | |RBA |3 where RCA = ax ay , RDA = ax + ay , and RBA = 2ax . The magnitudes are |RCA | = |RDA | = and |RBA | = 2. Substituting these leads to  (50 ⇥ 10 9 )2 1 1 2 p + p + F= ax = 21.5ax µN 4⇡✏0 2 2 2 2 8 p 2, where distances are in meters. 2.4. Eight identical point charges of Q C each are located at the corners of a cube of side length a, with one charge at the origin, and with the three nearest charges at (a, 0, 0), (0, a, 0), and (0, 0, a). Find an expression for the total vector force on the charge at P (a, a, a), assuming free space: The total electric field at P (a, a, a) that produces a force on the charge there will be the sum of the fields from the other seven charges. This is written below, where the charge locations associated with each term are indicated: 2 3 Enet (a, a, a) = 6a + a + a 7 q ay + az ax + az ax + ay 6 x 7 y z p p p p + + + + a + a + a 6 x y z 7 |{z} |{z} 4⇡✏0 a2 4 5 |{z} 3 3 2 2 2 2 2 2 | {z } | {z } | {z } | {z } (0,a,a) (a,0,a) (a,a,0) (0,0,0) (a,0,0) (0,a,0) (0,0,a) The force is now the product of this field and the charge at (a, a, a). Simplifying, we obtain  q2 1 1 1.90 q 2 p p F(a, a, a) = qEnet (a, a, a) = + + 1 (a + a + a ) = (ax + ay + az ) x y z 4⇡✏0 a2 3 3 4⇡✏0 a2 2 in which the magnitude is |F| = 3.29 q 2 /(4⇡✏0 a2 ). 2.5. Let a point charge Q1 = 25 nC be located at P1 (4, 2, 7) and a charge Q2 = 60 nC be at P2 ( 3, 4, 2). a) If ✏ = ✏0 , find E at P3 (1, 2, 3): This field will be  10 9 25R13 60R23 E= + 3 4⇡✏0 |R13 | |R23 |3 where R13 = So p p 4az and R23 = 4ax 2ay + 5az . Also, |R13 | = 41 and |R23 | = 45.  10 9 25 ⇥ ( 3ax + 4ay 4az ) 60 ⇥ (4ax 2ay + 5az ) E= + 4⇡✏0 (41)1.5 (45)1.5 3ax + 4ay = 4.58ax 0.15ay + 5.51az b) At what point on the y axis is Ex = 0? P3 is now p at (0, y, 0), so R13 = 4ax + p (y + 2)ay 2 and R23 = 3ax + (y 4)ay + 2az . Also, |R13 | = 65 + (y + 2) and |R23 | = 13 + (y Now the x component of E at the new P3 will be:  10 9 25 ⇥ ( 4) 60 ⇥ 3 Ex = + 2 1.5 4⇡✏0 [65 + (y + 2) ] [13 + (y 4)2 ]1.5 13 7az 4)2 . 2.5b (continued) To obtain Ex = 0, we require the expression in the large brackets to be zero. This expression simplifies to the following quadratic: 0.48y 2 + 13.92y + 73.10 = 0 which yields the two values: y = 6.89, 22.11 2.6. Two point charges of equal magnitude q are positioned at z = ±d/2. a) find the electric field everywhere on the z axis: For a point charge at any location, we have E= q(r r0 ) 4⇡✏0 |r r0 |3 In the case of two charges, we would therefore have ET = q1 (r r01 ) q2 (r r02 ) + 0 4⇡✏0 |r r1 |3 4⇡✏0 |r r02 |3 (1) In the present case, we assign q1 = q2 = q, the observation point position vector as r = zaz , and the charge position vectors as r01 = (d/2)az , and r02 = (d/2)az Therefore r01 = [z (d/2)]az , r r1 |3 = [z (d/2)]3 and |r r then |r r02 = [z + (d/2)]az , r2 |3 = [z + (d/2)]3 Substitute these results into (1) to obtain:  q 1 1 ET (z) = + 2 4⇡✏0 [z (d/2)] [z + (d/2)]2 az V/m (2) b) find the electric field everywhere on the x axis: We proceed as in part a, except that now r = xax . Eq. (1) becomes  q xax (d/2)az xax + (d/2)az ET (x) = + (3) 4⇡✏0 |xax (d/2)az |3 |xax + (d/2)az |3 where |xax Therefore (3) becomes ⇥ ⇤1/2 (d/2)az | = |xax + (d/2)az | = x2 + (d/2)2 ET (x) = 4⇡✏0 2qx ax 3/2 2 [x + (d/2)2 ] c) repeat parts a and b if the charge at z = d/2 is q instead of +q: The field along the z axis is quickly found by changing the sign of the second term in (2):  q 1 1 ET (z) = az V/m 4⇡✏0 [z (d/2)]2 [z + (d/2)]2 In like manner, the field along the x axis is found from (3) by again changing the sign of the second term. The result is 2qd az 3/2 4⇡✏0 [x2 + (d/2)2 ] 14 2.7. A 2 µC point charge is located at A(4, 3, 5) in free space. Find E⇢ , E , and Ez at P (8, 12, 2). Have EP =  2 ⇥ 10 6 RAP 2 ⇥ 10 6 4ax + 9ay 3az = = 65.9ax + 148.3ay 4⇡✏0 |RAP |3 4⇡✏0 (106)1.5 Then, at point P , ⇢ = p 82 + 122 = 14.4, 49.4az = tan 1 (12/8) = 56.3 , and z = z. Now, E⇢ = Ep · a⇢ = 65.9(ax · a⇢ ) + 148.3(ay · a⇢ ) = 65.9 cos(56.3 ) + 148.3 sin(56.3 ) = 159.7 and E = Ep · a = 65.9(ax · a ) + 148.3(ay · a ) = Finally, Ez = 65.9 sin(56.3 ) + 148.3 cos(56.3 ) = 27.4 49.4 V/m 2.8. A crude device for measuring charge consists of two small insulating spheres of radius a, one of which is fixed in position. The other is movable along the x axis, and is subject to a restraining force kx, where k is a spring constant. The uncharged spheres are centered at x = 0 and x = d, the latter fixed. If the spheres are given equal and opposite charges of Q coulombs: a) Obtain the expression by which Q may be found as a function of x: The spheres will attract, and so the movable sphere at x = 0 will move toward the other until the spring and Coulomb forces balance. This will occur at location x for the movable sphere. With equal and opposite forces, we have Q2 = kx 4⇡✏0 (d x)2 p from which Q = 2(d x) ⇡✏0 kx. b) Determine the maximum charge that can be measured in terms of ✏0 , k, and d, and state the separation of the spheres then: With increasing charge, the spheres move toward each other until they just touch at xmax = d 2a. Using the part a result, we find the maximum measurable p charge: Qmax = 4a ⇡✏0 k(d 2a). Presumably some form of stop mechanism is placed at x = xmax to prevent the spheres from actually touching. c) What happens if a larger charge is applied? No further motion is possible, so nothing happens. 2.9. A 100 nC point charge is located at A( 1, 1, 3) in free space. a) Find the locus of all points P (x, y, z) at which Ex = 500 V/m: The total field at P will be: EP = 100 ⇥ 10 9 RAP 4⇡✏0 |RAP |3 where RAP = (x+1)ax +(y 1)ay +(z 3)az , and where |RAP | = [(x+1)2 +(y 1)2 +(z 3)2 ]1/2 . The x component of the field will be  100 ⇥ 10 9 (x + 1) Ex = = 500 V/m 2 4⇡✏0 [(x + 1) + (y 1)2 + (z 3)2 ]1.5 And so our condition becomes: (x + 1) = 0.56 [(x + 1)2 + (y 15 1)2 + (z 3)2 ]1.5 2.9b) Find y1 if P ( 2, y1 , 3) lies on that locus: At point P , the condition of part a becomes ⇥ ⇤3 3.19 = 1 + (y1 1)2 from which (y1 1)2 = 0.47, or y1 = 1.69 or 0.31 2.10. A charge of -1 nC is located at the origin in free space. What charge must be located at (2,0,0) to cause Ex to be zero at (3,1,1)? The field from two point charges is given generally by ET = q1 (r r01 ) q2 (r r02 ) + 4⇡✏0 |r r01 |3 4⇡✏0 |r r02 |3 (1) where we let q1 = 1nC and q2 is to be found. With q1 at the origin, r01 = 0. The position vector for q2 is then r02 = 2ax . The observation point at (3,1,1) gives r = 3ax + ay + az . Eq. (1) becomes  1 1(3ax + ay + az ) q2 [(3 2)ax + ay + az ] + 4⇡✏0 (32 + 1 + 1)3/2 (1 + 1 + 1)3/2 Requiring the x component to be zero leads to q2 = 35/2 = 0.43 nC 113/2 2.11. A charge Q0 located at the origin in free space produces a field for which Ez = 1 kV/m at point P ( 2, 1, 1). a) Find Q0 : The field at P will be Q0 EP = 4⇡✏0  2ax + ay 61.5 Since the z component is of value 1 kV/m, we find Q0 = az 4⇡✏0 61.5 ⇥ 103 = 1.63 µC. b) Find E at M (1, 6, 5) in cartesian coordinates: This field will be:  1.63 ⇥ 10 6 ax + 6ay + 5az EM = 4⇡✏0 [1 + 36 + 25]1.5 or EM = 30.11ax 180.63ay 150.53az . c) Find E at M (1, 6, 5) in cylindrical coordinates: At M , ⇢ = 80.54 , and z = 5. Now E⇢ = EM · a⇢ = so that EM = E = EM · a = 183.12a⇢ 30.11 cos 30.11( sin ) p 1 + 36 = 6.08, 180.63 sin 180.63 cos = = tan 1 (6/1) = 183.12 = 0 (as expected) 150.53az . p d) Find E at M (1, 6, 5) in spherical coordinates: At M , r = 1 + 36 + 25 = 7.87, = 80.54 (as before), and ✓ = cos 1 (5/7.87) = 50.58 . Now, since the charge is at the origin, we expect to obtain only a radial component of EM . This will be: Er = EM · ar = 30.11 sin ✓ cos 180.63 sin ✓ sin 16 150.53 cos ✓ = 237.1 2.12. Electrons are in random motion in a fixed region in space. During any 1µs interval, the probability of finding an electron in a subregion of volume 10 15 m2 is 0.27. What volume charge density, appropriate for such time durations, should be assigned to that subregion? The finite probabilty e↵ectively reduces the net charge quantity by the probability fraction. With e = 1.602 ⇥ 10 19 C, the density becomes 0.27 ⇥ 1.602 ⇥ 10 19 = 10 15 ⇢v = 43.3 µC/m3 2.13. A uniform volume charge density of 0.2 µC/m3 is present throughout the spherical shell extending from r = 3 cm to r = 5 cm. If ⇢v = 0 elsewhere: a) find the total charge present throughout the shell: This will be Q=  .05 r3 0.2 r sin ✓ dr d✓ d = 4⇡(0.2) = 8.21 ⇥ 10 5 µC = 82.1 pC 3 .03 .03 Z 2⇡ Z ⇡ Z .05 0 0 2 b) find r1 if half the total charge is located in the region 3 cm < r < r1 : If the integral over r in part a is taken to r1 , we would obtain  r r3 1 4⇡(0.2) = 4.105 ⇥ 10 5 3 .03 Thus r1 =  3 ⇥ 4.105 ⇥ 10 5 + (.03)3 0.2 ⇥ 4⇡ 1/3 = 4.24 cm 2.14. The electron beam in a certain cathode ray tube possesses cylindrical symmetry, and the charge density is represented by ⇢v = 0.1/(⇢2 + 10 8 ) pC/m3 for 0 < ⇢ 3 ⇥ 10 4 m. a) Find the total charge per meter along the length of the beam: We integrate the charge density over the cylindrical volume having radius 3 ⇥ 10 4 m, and length 1m. q= Z 1 Z 2⇡ Z 3⇥10 4 0 0 0 0.1 (⇢2 + 10 8 ) ⇢ d⇢ d dz From integral tables, this evaluates as q= ✓ ◆ 1 0.2⇡ ln ⇢2 + 10 8 2 3⇥10 0 4 = 0.1⇡ ln(10) = 0.23⇡ pC/m b) if the electron velocity is 5 ⇥ 107 m/s, and with one ampere defined as 1C/s, find the beam current: Current = charge/m ⇥ v = 0.23⇡ [pC/m] ⇥ 5 ⇥ 107 [m/s] = 17 11.5⇡ ⇥ 106 [pC/s] = 11.5⇡ µA 2.15. A spherical volume having a 2 µm radius contains a uniform volume charge density of 105 C/m3 (not 1015 as stated in earlier printings). a) What total charge is enclosed in the spherical volume? This will be Q = (4/3)⇡(2 ⇥ 10 6 )3 ⇥ 105 = 3.35 ⇥ 10 12 C. b) Now assume that a large region contains one of these little spheres at every corner of a cubical grid 3mm on a side, and that there is no charge between spheres. What is the average volume charge density throughout this large region? Each cube will contain the equivalent of one little sphere. Neglecting the little sphere volume, the average density becomes ⇢v,avg = 3.35 ⇥ 10 12 = 1.24 ⇥ 10 4 C/m3 (0.003)3 2.16. Within a region of free space, charge density is given as ⇢v = (⇢0 r/a) cos ✓ C/m3 , where ⇢0 and a are constants. Find the total charge lying within: a) the sphere, r  a: This will be Qa = Z 2⇡ Z ⇡ Z a 0 0 0 ⇢0 r cos ✓ r2 sin ✓ dr d✓ d = 2⇡ a Z a 0 ⇢0 r3 dr = 0 a b) the cone, r  a, 0  ✓  0.1⇡: Qb = Z 2⇡ Z 0.1⇡ Z a 0 0 0 ⇢0 r ⇢0 a3 ⇥ cos ✓ r2 sin ✓ dr d✓ d = ⇡ 1 a 4 c) the region, r  a, 0  ✓  0.1⇡, 0  Qc = Z 0.2⇡ Z 0.1⇡ Z a 0 0 0 ⇤ cos2 (0.1⇡) = 0.024⇡⇢0 a3  0.2⇡. ⇢0 r cos ✓ r2 sin ✓ dr d✓ d = 0.024⇡⇢0 a3 a ✓ 0.2⇡ 2⇡ 2.17. A uniform line charge of 16 nC/m is located along the line defined by y = a) Find E at P (1, 2, 3): This will be EP = where RP = (1, 2, 3) ◆ = 0.0024⇡⇢0 a3 2, z = 5. If ✏ = ✏0 : ⇢l RP 2⇡✏0 |RP |2 (1, 2, 5) = (0, 4, 2), and |RP |2 = 20. So EP =  16 ⇥ 10 9 4ay 2az = 57.5ay 2⇡✏0 20 28.8az V/m b) Find E at that point in the z = 0 plane where the direction of E is given by (1/3)ay With z = 0, the general field will be  ⇢l (y + 2)ay 5az Ez=0 = 2⇡✏0 (y + 2)2 + 25 18 (2/3)az : We require |Ez | = |2Ey |, so 2(y + 2) = 5. Thus y = 1/2, and the field becomes:  ⇢l 2.5ay 5az Ez=0 = = 23ay 2⇡✏0 (2.5)2 + 25 46az 2.18. a) Find E in the plane z = 0 that is produced by a uniform line charge, ⇢L , extending along the z axis over the range L < z < L in a cylindrical coordinate system: We find E through E= Z L ⇢L dz(r r0 ) r0 |3 L 4⇡✏0 |r where the observation point position vector is r = ⇢a⇢ (anywhere in the x-y plane), and where the position vector that locates any di↵erential charge element on the z axis is r0 = zaz . So r r0 = ⇢a⇢ zaz , and |r r0 | = (⇢2 + z 2 )1/2 . These relations are substituted into the integral to yield: E= Z L ⇢L dz(⇢a⇢ zaz ) ⇢L ⇢ a⇢ = 2 2 3/2 4⇡✏0 L 4⇡✏0 (⇢ + z ) Z L L dz (⇢2 + z 2 )3/2 = E⇢ a⇢ Note that the second term in the left-hand integral (involving zaz ) has e↵ectively vanished because it produces equal and opposite sign contributions when the integral is taken over symmetric limits (odd parity). Evaluating the integral results in E⇢ = L ⇢L ⇢ z ⇢L L ⇢L 1 p p p = = 4⇡✏0 ⇢2 ⇢2 + z 2 L 2⇡✏0 ⇢ ⇢2 + L2 2⇡✏0 ⇢ 1 + (⇢/L)2 Note that as L ! 1, the expression reduces to the expected field of the infinite line charge in free space, ⇢L /(2⇡✏0 ⇢). b) if the finite line charge is approximated by an infinite line charge (L ! 1), by what percentage is E⇢ in error if ⇢ = 0.5L? The percent error in this situation will be " % error = 1 For ⇢ = 0.5L, this becomes % error = 10.6 % # 1 p ⇥ 100 1 + (⇢/L)2 c) repeat b with ⇢ = 0.1L. For this value, obtain % error = 0.496 %. 2.19. A uniform line charge of 2 µC/m is located on the z axis. Find E in rectangular coordinates at P (1, 2, 3) if the charge extends from a) 1 < z < 1: With the infinite line, we know that the field will have only a radial component in cylindrical coordinates (or x and y components in cartesian). The field from an infinite line on the z axis is generally E = [⇢l /(2⇡✏0 ⇢)]a⇢ . Therefore, at point P : EP = ⇢l RzP (2 ⇥ 10 6 ) ax + 2ay = = 7.2ax + 14.4ay kV/m 2 2⇡✏0 |RzP | 2⇡✏0 5 where RzP is the vector that extends from the line charge to point P , and is perpendicular to the z axis; i.e., RzP = (1, 2, 3) (0, 0, 3) = (1, 2, 0). 19 b) 4  z  4: Here we use the general relation EP = Z ⇢l dz r r0 4⇡✏0 |r r0 |3 2.19b (continued) where r = ax + 2ay + 3az and r0 = zaz . So the integral becomes Z 4 (2 ⇥ 10 6 ) EP = 4⇡✏0 ax + 2ay + (3 z)az dz [5 + (3 z)2 ]1.5 4 Using integral tables, we obtain: EP = 3597  4 (ax + 2ay )(z 3) + 5az (z 2 6z + 14) V/m = 4.9ax + 9.8ay + 4.9az kV/m 4 The student is invited to verify that when evaluating the above expression over the limits 1 < z < 1, the z component vanishes and the x and y components become those found in part a. 2.20. A line charge of uniform charge density ⇢0 C/m and of length `, is oriented along the z axis at `/2 < z < `/2. a) Find the electric field strength, E, in magnitude and direction at any position along the x axis: This follows the method in Problem 2.18. We find E through E= Z `/2 ⇢0 dz(r r0 ) r0 |3 `/2 4⇡✏0 |r where the observation point position vector is r = xax (anywhere on the x axis), and where the position vector that locates any di↵erential charge element on the z axis is r0 = zaz . So r r0 = xax zaz , and |r r0 | = (x2 + z 2 )1/2 . These relations are substituted into the integral to yield: Z `/2 Z ⇢0 dz(xax zaz ) ⇢0 x ax `/2 dz E= = = Ex ax 2 + z 2 )3/2 2 + z 2 )3/2 4⇡✏ 4⇡✏ (x (x 0 0 `/2 `/2 Note that the second term in the left-hand integral (involving zaz ) has e↵ectively vanished because it produces equal and opposite sign contributions when the integral is taken over symmetric limits (odd parity). Evaluating the integral results in Ex = `/2 ⇢0 x z ⇢0 `/2 ⇢0 1 p p p = = 2 2 2 2 2 4⇡✏0 x x + z 2⇡✏0 x x + (`/2) 2⇡✏0 x 1 + (2x/`)2 `/2 b) with the given line charge in position, find the force acting on an identical line charge that is oriented along the x axis at `/2 < x < 3`/2: The di↵erential force on an element of the x-directed line charge will be dF = dqE = (⇢0 dx)E, where E is the field as determined in part a. The net force is then the integral of the di↵erential force over the length of the horizontal line charge, or F= Z 3`/2 `/2 ⇢20 1 p dx ax 2⇡✏0 x 1 + (2x/`)2 20 This can be re-written and then evaluated using integral tables as 0 " #3`/2 1 p Z 3`/2 2 2 2 2 `/2 + x + (`/2) ⇢ ` ax dx ⇢0 ` ax @ 1 A p F= 0 = ln 2 2 4⇡✏0 `/2 x x + (`/2) 4⇡✏0 (`/2) x `/2 " # " # p p (`/2) 1 + 10 ⇢20 ax ⇢2 ax 3(1 + 2) 0.55⇢20 p p = ln = 0 ln = ax N 2⇡✏0 2⇡✏0 2⇡✏0 3(`/2) 1 + 2 1 + 10 2.21. Two identical uniform line charges with ⇢l = 75 nC/m are located in free space at x = 0, y = ±0.4 m. What force per unit length does each line charge exert on the other? The charges are parallel to the z axis and are separated by 0.8 m. Thus the field from the charge at y = 0.4 evaluated at the location of the charge at y = +0.4 will be E = [⇢l /(2⇡✏0 (0.8))]ay . The force on a di↵erential length of the line at the positive y location is dF = dqE = ⇢l dzE. Thus the force per unit length acting on the line at postive y arising from the charge at negative y is F= Z 1 0 ⇢2l dz ay = 1.26 ⇥ 10 4 ay N/m = 126 ay µN/m 2⇡✏0 (0.8) The force on the line at negative y is of course the same, but with ay . 2.22. Two identical uniform sheet charges with ⇢s = 100 nC/m2 are located in free space at z = ±2.0 cm. What force per unit area does each sheet exert on the other? The field from the top sheet is E = ⇢s /(2✏0 ) az V/m. The di↵erential force produced by this field on the bottom sheet is the charge density on the bottom sheet times the di↵erential area there, multiplied by the electric field from the top sheet: dF = ⇢s daE. The force per unit area is then just F = ⇢s E = (100 ⇥ 10 9 )( 100 ⇥ 10 9 )/(2✏0 ) az = 5.6 ⇥ 10 4 az N/m2 . 2.23. Given the surface charge density, ⇢s = 2 µC/m2 , in the region ⇢ > .04. Continuing: . ⇢s ⇥ Ez = 1 2✏0 [1 ⇤ 0.04⇢s ⇡(0.2)2 ⇢s (1/2)(0.04)/z 2 ] = = 4✏0 z 2 4⇡✏0 z 2 This the point charge field, where we identify q = ⇡(0.2)2 ⇢s as the total charge on the disk (which now looks like a point). 22 2.24. a) Find the electric field on the z axis produced by an annular ring of uniform surface charge density ⇢s in free space. The ring occupies the region z = 0, a  ⇢  b, 0   2⇡ in cylindrical coordinates: We find the field through Z Z ⇢s da(r r0 ) E= 4⇡✏0 |r r0 |3 where the integral is taken over the surface of the annular ring, and where r = zaz and r0 = ⇢a⇢ . The integral then becomes Z 2⇡ Z b ⇢s ⇢ d⇢ d (zaz ⇢a⇢ ) E= 4⇡✏0 (z 2 + ⇢2 )3/2 0 a In evaluating this integral, we first note that the term involving ⇢a⇢ integrates to zero over the integration range of 0 to 2⇡. This is because we need to introduce the dependence in a⇢ by writing it as a⇢ = cos ax + sin ay , where ax and ay are invariant in their orientation as varies. So the integral now simplifies to ” #b Z 2⇡⇢s z az b ⇢ d⇢ ⇢s z az 1 p E= = 2 2 3/2 4⇡✏0 2✏0 z 2 + ⇢2 a a (z + ⇢ ) ” # ⇢s 1 1 p p = az 2✏0 1 + (a/z)2 1 + (b/z)2 b) from your part a result, obtain the field of an infinite uniform sheet charge by taking appropriate limits. The infinite sheet is obtained by letting a ! 0 and b ! 1, in which case E ! ⇢s /(2✏0 ) az as expected. 2.25. Find E at the origin if the following charge distributions are present in free space: point charge, 12 nC at P (2, 0, 6); uniform line charge density, 3nC/m at x = 2, y = 3; uniform surface charge density, 0.2 nC/m2 at x = 2. The sum of the fields at the origin from each charge in order is:  (12 ⇥ 10 9 ) ( 2ax 6az ) (3 ⇥ 10 9 ) (2ax 3ay ) E= + 4⇡✏0 (4 + 36)1.5 2⇡✏0 (4 + 9) =  3.9ax 12.4ay 2.5az V/m 23  (0.2 ⇥ 10 9 )ax 2✏0 2.26. Radially-dependent surface charge is distributed on an infinite flat sheet in the xy plane, and is characterized in cylindrical coordinates by surface density ⇢s = ⇢0 /⇢, where ⇢0 is a constant. Determine the electric field strength, E, everywhere on the z axis. We find the field through E= Z Z ⇢s da(r r0 ) 4⇡✏0 |r r0 |3 where the integral is taken over the surface of the annular ring, and where r = zaz and r0 = ⇢a⇢ . The integral then becomes Z 2⇡ Z 1 (⇢0 /⇢) ⇢ d⇢ d (zaz ⇢a⇢ ) E= 4⇡✏0 (z 2 + ⇢2 )3/2 0 0 In evaluating this integral, we first note that the term involving ⇢a⇢ integrates to zero over the integration range of 0 to 2⇡. This is because we need to introduce the dependence in a⇢ by writing it as a⇢ = cos ax + sin ay , where ax and ay are invariant in their orientation as varies. So the integral now simplifies to ” #1 Z 2⇡⇢s z az 1 d⇢ ⇢s z az ⇢ ⇢s p E= = = az 2 2 3/2 4⇡✏0 2✏0 2✏0 z (z + ⇢ ) z 2 z 2 + ⇢2 0 ⇢=0 2.27. Given the electric field E = (4x 2y)ax (2x + 4y)ay , find: a) the equation of the streamline that passes through the point P (2, 3, 4): We write dy Ey (2x + 4y) = = dx Ex (4x 2y) Thus 2(x dy + y dx) = y dy or 2 d(xy) = 1 d(y 2 ) 2 So C1 + 2xy = or y2 1 2 y 2 x dx 1 d(x2 ) 2 1 2 x 2 x2 = 4xy + C2 Evaluating at P (2, 3, 4), obtain: 9 4 = 24 + C2 , or C2 = 19 Finally, at P , the requested equation is y2 x2 = 4xy 19 b) a unit vector specifying the direction p of E at Q(3, 2, 5): Have EQ = [4(3) + 2(2)]ax 4(2)]ay = 16ax + 2ay . Then |E| = 162 + 4 = 16.12 So aQ = 16ax + 2ay = 0.99ax + 0.12ay 16.12 24 [2(3) 2.28 An electric dipole (discussed in detail in Sec. 4.7) consists of two point charges of equal and opposite magnitude ±Q spaced by distance d. With the charges along the z axis at positions z = ±d/2 (with the positive ⇥ charge at the ⇤ positive z location), the electric field in spherical coordinates is given by E(r, ✓) = Qd/(4⇡✏0 r3 ) [2 cos ✓ar + sin ✓a✓ ], where r >> d. Using rectangular coordinates, determine expressions for the vector force on a point charge of magnitude q: a) at (0, 0, z): Here, ✓ = 0, ar = az , and r = z. Therefore F(0, 0, z) = b) at (0, y, 0): Here, ✓ = 90 , a✓ = qQd az N 4⇡✏0 z 3 az , and r = y. The force is qQd az N 4⇡✏0 y 3 F(0, y, 0) = 2.29. If E = 20e 5y (cos 5xax sin 5xay ), find: a) |E| at P (⇡/6, 0.1, 2): Substituting this point, we obtain EP = 12.2. 10.6ax 6.1ay , and so |EP | = b) a unit vector in the direction of EP : The unit vector associated with E is (cos 5xax which evaluated at P becomes aE = 0.87ax 0.50ay . sin 5xay ), c) the equation of the direction line passing through P : Use dy sin 5x = = dx cos 5x tan 5x ) dy = tan 5x dx Thus y = 15 ln cos 5x + C. Evaluating at P , we find C = 0.13, and so y= 1 ln cos 5x + 0.13 5 2.30. For fields that do not vary with z in cylindrical coordinates, the equations of the streamlines are obtained by solving the di↵erential equation E⇢ /E = d⇢(⇢d ). Find the equation of the line passing through the point (2, 30 , 0) for the field E = ⇢ cos 2 a⇢ ⇢ sin 2 a : E⇢ d⇢ ⇢ cos 2 = = = E ⇢d ⇢ sin 2 cot 2 ) d⇢ = ⇢ cot 2 d Integrate to obtain 2 ln ⇢ = ln sin 2 + ln C = ln  C sin 2 ) ⇢2 = C sin 2 p At the given point, we have 4 = C/ sin(60 ) ) C = 4 sin 60 = 2 3. Finally, the equation for p the streamline is ⇢2 = 2 3/ sin 2 . 25